Tag: upgrade

Upgrade / Downgrade Juniper SRX Software

1) Ensure there are no un-committed changes: user@srx# top user@srx# show | compare 2) Backup the configuration on the SRX (setup logging on the SSH connection) user@srx# show configuration | no-more 3) Check the size of the flash and purge any unused files: —Check size of Flash show system storage | match cf — Purge…




Cisco ASA Upgrade process (active-failover)

To upgrade two ASA firewalls in an Active/Standby failover configuration, use the following steps: 1)┬áTo find out the current image of the ASA run the following command ASAactive#show run boot 2) Specify the new boot image for the ASA and remove the line for the old image ASAactive(config)#boot system disk0:/newASAimage.bin ASAactive(config)#no boot system disk0:/oldASAimage.bin 3)…